We make sure to standardize our furnace tune-up process so every customer gets the same precise tune-up. For your reference, here is a copy of the checklist your Long Heating & Air tech will be using to repair/maintain your home heating system.

1. Voltage: High___________ Low___________ 2. Check All Wiring Connections 3. Evaporator Coil Cleanliness 4. Drains Cleared and Run Properly 5. Test Condensate Pump and Inspect Drain Line 6. Blower Motor amp rating:___________ Actual:__________ 7. Blower Capacitor Rating: _________ Actual: ___________ 8. Blower Motor Cleanliness 9. Check Wiring in Furnace/Air Handler 10. Check Circuit Board for Burn Marks 11. Temperature Rise: ___________________ 12. Condition of Duct Work / Filtration System 13. Thermostat Programmed to Clients Needs

14. Induced draft motor amp rating:______ Actual: _______ 15. Clean/test flame sensor 16. Clean pressure switch ports 17. Testing igniter 18. Gas pressure: Low ___________ High __________ 19. Check for gas leaks 20. Visual inspection of heat exchanger 21. Check carbon monoxide levels in flue pipe 22. Check carbon monoxide levels in the house 23. Wipe down in and around furnace cabinet 24. Vacuum out furnace cabinet 25. Check humidifier pad 26. Check humidifier operation